Installation Manual

Introduction to the ProCurve Secure Router ProCurve Secure Router Installation Guide

If needed, an ISDN BRI U Backup Module, ISDN BRI S/T Backup Module, or Analog Modem Backup

Module can plug onto any narrow interface module, providing backup capability. Refer to Installing

Interface and Backup Modules on page 38 for more details.

For VPN applications using the ProCurve Secure Router, the optional 7100/7200 IPSec Module and

7100/7200 IPSec Base Module provide or activate encryption/decryption and security services. Refer to

Installing the Encryption Module on page 40. The installation of the optional encryption module enables

the software features associated with the VPN services.

Features

The ProCurve Secure Routers have the following features:

• Modular network interface via module (card) slots

• 1U-high metal chassis with two or three slots for option modules

• Two integrated 10/100BaseT Ethernet ports (RJ-45 with auto-MDIX)

• Layer 2 WAN Protocol: Frame Relay, Multilink Frame Relay, PPP, Multilink PPP, HDLC

• Integrated IP router with bridging

• RIP Versions 1 and 2, OSPF, and BGP

• IP encapsulation over Frame Relay (RFC1490)

• Secure Router Operating System (SROS) Command Line Interface (CLI)

• SNMP management

•Web GUI

• Integrated EIA-232 DTE configuration port (DB-9)

• Optional backup modules available

• Optional 7100/7200 IPSec Module and 7100/7200 IPSec Base Module provide encryption/decryption

and security services

• Front panel LEDs

• Mountable in a 19-inch rack

• Worldwide auto-ranging AC power supply

Specifications

The ProCurve Secure Routers have the following specifications:

Physical

ProCurve Secure Router 7102dl ProCurve Secure Router 7203dl

Width 44.25 cm (17.42 in) 44.25 cm (17.42 in)

Depth 29.26 cm (11.52 in) 29.26 cm (11.52 in)

Height 4.39 cm (1.73 in) 4.39 cm (1.73 in)

Weight 4.66 kg (10.26 lbs) 4.98 kg (10.95 lbs)