Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 98
dir
Use the dir command to display a directory list of files on the system.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is sample output from the dir command:
>enable
#dir
4206603 HP7203A-08-00-23b-HP1-E.biz
3818 startup-config
3850 startup-config.bak
284007 HP7203B-boot-08-01-01-HP.biz
4234845 HP7203A-08-01-01-HP-E.biz
284238 HP7203B-boot-08-01-02-HPatp.biz
4038590 HP7203A-08-01-02-HPatp-E.biz
285416 J01_01_02-boot.biz
4039977 J01_01_02.biz
4043024 J01_01_03.biz
2649600 ericcode.biz
2896 EUT2bindcfg.txt
24208408 bytes used, 4915176 available, 29123584 total