Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 95
debug spanning-tree [config | events | general | root]
Use the debug spanning-tree command to enable the display of spanning-tree debug messages.
Syntax Description
config Enables the display of spanning-tree debug messages when configuration
changes occur.
events Enables the display of debug messages when spanning-tree protocol events
occur.
general Enables the display of general spanning-tree debug messages.
root Enables the display of debug messages related to the spanning-tree root.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example enables the display of general spanning-tree debug messages:
>enable
#debug spanning-tree general