Command Reference Guide

Common Commands
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 930
exit
Use the exit command to exit the current Configuration Mode and enter the previous one. For example,
using the exit command in the Interface Configuration Mode will activate the Global Configuration Mode.
When using the exit command in the Basic Mode, the current session will be terminated.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Command Modes
This command is valid for all Configuration Modes.
Usage Examples
The following example shows the exit command being executed in the Global Configuration Mode:
(config)#
exit
#
# - Enable Security Mode command prompt
Note
When exiting the Global Configuration Mode, remember to perform a copy running-config
startup-config to save all configuration changes.