Command Reference Guide

Quality of Service (QoS) Map Commands
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 921
set precedence <0-7>
The set precedence command is an optional command for a QoS map that can be used to modify the IP
precedence value (on matching packets) to the specified value.
Syntax Description
<0-7> Enter the decimal IP precedence value.
Default Values
No default value is necessary for this command.
Command Modes
(config-qos-map)# QoS Map Configuration Mode required.
Usage Examples
This command sets the IP precedence value (for all matching traffic) to 5:
(config)#qos map VOICEMAP 10
(config-qos-map)#set precedence 5