Command Reference Guide

Quality of Service (QoS) Map Commands
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 920
set dscp <0-63>
The set dscp command is an optional command for a QoS map that can be used to modify the DSCP field
(on matching packets) to the specified value.
Syntax Description
<0-63> Enter the decimal DSCP value.
Default Values
No default value is necessary for this command.
Command Modes
(config-qos-map)# QoS Map Configuration Mode required.
Usage Examples
This command sets the DSCP value (for all matching traffic) to 46:
(config)#qos map VOICEMAP 10
(config-qos-map)#set dscp 46