Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
919293949596979899100
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 92
debug pppoe client
Use the debug pppoe client command to activate debug messages associated with point-to-point protocol
over Ethernet (PPPoE) operation in the Secure Router OS. Debug messages are displayed (real-time) to
the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
# Enable Mode
Functional Notes
The debug ip rip command activates debug messages to provide information on Routing Information
Protocol (RIP) activity in the Secure Router OS. RIP allows hosts and routers on a network to exchange
information about routes.
Usage Examples
The following example activates debug messages associated with PPPoE activity:
>enable
#debug pppoe client