Command Reference Guide

Router (OSPF) Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 915
timers lsa-group-pacing <seconds>
Use the timers lsa-group-pacing command to change the link state advertisement (LSA) refresh interval.
Syntax Description
<seconds> Set the LSA refresh interval in seconds (range: 10-1,800).
Default Values
By default, this value is set at 240 seconds.
Command Modes
(config-ospf)# Router (OSPF) Configuration Mode required
Usage Examples
The following example sets the refresh interval for six minutes:
(config)#router ospf
(config-ospf)#timers lsa-group-pacing 360