Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ppp [authentication | errors | negotiation | verbose]

Use the debug ppp command to activate debug messages associated with point-to-point protocol (PPP)

operation in the Secure Router OS. Debug messages are displayed (real-time) to the terminal (or Telnet)

screen. Use the no form of this command to disable the debug messages.

Syntax Description

authentication Activates debug messages pertaining to PPP authentication (CHAP, PAP, EAP,

etc.).

errors Activates debug messages that indicate a PPP error was detected (mismatch in

negotiation authentication, etc.).

negotiation Activates debug messages associated with PPP negotiation.

verbose Activates detailed debug messages for PPP operation.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

The debug ppp command activates debug messages to provide information on PPP activity in the system.

PPP debug messages can be used to aid in troubleshooting PPP links.

Usage Examples

The following example activates debug messages associated with PPP authentication activity:

>enable

#debug ppp authentication