Command Reference Guide

Line (Telnet) Interface Config Command Set

Use the login command to enable security login on the line session requiring the password configured

using the password command. Use the no form of this command to disable the login feature.

Syntax Description

No subcommands.

Default Values

By default, there is no login password set for access to the unit.

Command Modes

(config-line)# Line Configuration Mode

Valid interfaces include: Console (con 0) and Telnet (telnet X)

Usage Examples

The following example enables the security login feature and specifies a password on all the available

Telnet sessions (0 through 4):

(config)#line telnet 0 4

(config-telnet0-4)#login

(config-telnet0-4)#password mypassword