Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 89
debug lldp [rx | tx] verbose
Use the debug lldp command to display debug output for all LLDP receive and transmit packets.
Syntax Description
rx Shows information about received packets.
tx Shows information about transmitted packets.
verbose Shows detailed debugging information.
Default Values
By default, all debug messages in the Secure Router OS are disabled.
Command Modes
# Enable Command Mode
Usage Examples
The following example activates all possible debug messages associated with LLDP operation:
#debug lldp rx
#debug lldp tx
#debug lldp verbose