Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
81828384858687888990
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 88
debug isdn events
Use the debug isdn events command to activate debug messages associated with ISDN events in the
Secure Router OS. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
# Enable Mode
Functional Notes
The debug ip rip command activates debug messages to provide information on Routing Information
Protocol (RIP) activity in the Secure Router OS. RIP allows hosts and routers on a network to exchange
information about routes.
Usage Examples
The following example activates debug messages associated with ISDN activity:
>enable
#debug isdn events