Command Reference Guide

SROS Command Line Interface Reference Guide Line (Console) Interface Config Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 878
flowcontrol [none | software in]
Use the flowcontrol command to set flow control for the line console.
Syntax Description
none Set no flow control.
software in Configure the Secure Router OS to derive flow control from the attached device.
Default Values
By default, flow control is set to none.
Command Modes
(config-con 0)# Console Interface Configuration Mode required
Usage Examples
The following example configures no flow control for the line console:
(config)#line console 0
(config-con 0)#flowcontrol none