Command Reference Guide

SROS Command Line Interface Reference Guide Loopback Interface Configuration Command Set

crypto map <mapname>

Use the crypto map command to associate crypto maps with the interface.

Syntax Description

<mapname> Enter the crypto map name that you wish to assign to the interface.

Default Values

By default, no crypto maps are assigned to an interface.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

Frame Relay sub-interfaces (fr 1.20), and loopback interfaces

Note

When you apply a map to an interface, you are applying all crypto maps with the given map

name. This allows you to apply multiple crypto maps if you have created maps which share

the same name but have different map index numbers.

Note

For VPN configuration example scripts, refer to the VPN Configuration Guide located on

the ProCurve SROS Documentation CD provided with your unit.