Command Reference Guide

SROS Command Line Interface Reference Guide HDLC Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 845
qos-policy out <mapname>
Use the qos-policy out command to apply a previously-configured QoS map to an interface. Use the no
form of this command to remove the map from the interface. The out keyword specifies that this policy
will be applied to outgoing packets.
Syntax Description
<map name> Specifies the name of a previously-created QoS map.
Default Values
No default value is necessary for this command.
Command Modes
(config-interface)# Interface Configuration Mode
Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual
HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel
interfaces (tunnel 1), and VLAN interface (vlan 1).
Usage Examples
The following example applies the QoS map VOICEMAP to the HDLC interface:
(config)#interface hdlc 1
(config-hdlc 1)#qos-policy out VOICEMAP