Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 82
debug ip igmp <group-address>
Use the debug ip igmp command to enable debug messages for IGMP transactions (including helper
activity).
Syntax Description
<group-address> Optional. IP address of a multicast group.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example enables IGMP debug messages for the specified multicast group:
>enable
#debug ip igmp 224.1.1.1