Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ip dns-proxy

Use the debug ip dns-proxy command to activate debug messages associated with DNS (domain naming

system) proxy operation in the Secure Router OS. Debug messages are displayed (real-time) to the

terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug ip dns-proxy command activates debug messages to provide information on DNS proxy

activity in the Secure Router OS. The IP DNS capability allows for DNS-based host translation

(name-to-address).

Usage Examples

The following example activates debug messages associated with DNS proxy activity:

>enable

#debug ip dns-proxy