Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ip dns-client

Use the debug ip dns-client command to activate debug messages associated with DNS (domain naming

system) client operation in the Secure Router OS. Debug messages are displayed (real-time) to the terminal

(or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug ip dns-client command activates debug messages to provide information on DNS client

activity in the Secure Router OS. The IP DNS capability allows for DNS-based host translation

(name-to-address).

Usage Examples

The following example activates debug messages associated with DNS client activity:

>enable

#debug ip dns-client