Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 78
debug ip dhcp-server
Use the debug ip dhcp-server command to activate debug messages associated with DHCP server
operation in the Secure Router OS. Debug messages are displayed (real-time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the Secure Router OS are disabled.
Command Modes
# Enable Command Mode
Functional Notes
The debug ip dhcp-server command activates debug messages to provide information on DHCP server
activity in the Secure Router OS. The Secure Router OS DHCP server capability allows the Secure Router
OS to dynamically assign IP addresses to hosts on the network.
Usage Examples
The following example activates debug messages associated with DHCP server activity:
>enable
#debug ip dhcp-server