Command Reference Guide

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

pppoe service-name <name>

Use the pppoe service-name command to use this tag value to filter PPPoE session offers from PPPoE

servers. Use the no form of this command to return to the default setting.

Syntax Description

<name> Enter a text string (up to 255 characters) corresponding to the Service-Name Tags

under RFC 2516. This string indicates an ISP name (or a class or quality of

service)

. If this field is not specified, any service is acceptable.

Default Values

By default, no names are specified.

Command Modes

(config-ppp 1)# PPP Interface Configuration Mode required

Usage Examples

The following example defines a service type that is not to be accepted by the Secure Router OS:

(config)#interface ppp 1

(config-ppp 1)#pppoe service-name Service_Name