Command Reference Guide

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

pppoe ac-name <name>

Use the pppoe ac-name command to identify the Access Concentrator (AC) with which the Secure Router

OS expects to establish a PPPoE session. Use the no form of this command to return to the default setting.

Syntax Description

<name> Enter a text string (up to 255 characters) corresponding to the AC-Name Tag

under RFC 2516. If this field is not specified, any access concentrator is

acceptable. The AC value may be a combination of trademark, model, and serial

ID information (or simply the MAC address of the unit).

Default Values

By default, no AC is specified.

Command Modes

(config-ppp 1)# PPP Interface Configuration Mode required

Usage Examples

The following example identifies the AC with which the Secure Router OS expects to establish a PPPoE

session:

(config)#interface ppp 1

(config-ppp 1)#pppoe acc-name Access_Concentrator_Name