Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ip dhcp-client

Use the debug ip dhcp-client command to activate debug messages associated with DHCP client

operation in the Secure Router OS. Debug messages are displayed (real-time) to the terminal (or Telnet)

screen. Use the no form of this command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug ip dhcp-client command activates debug messages to provide information on DHCP client

activity in the Secure Router OS. The Secure Router OS DHCP client capability allows interfaces to

dynamically obtain an IP address from a network DHCP server.

Usage Examples

The following example activates debug messages associated with DHCP client activity:

>enable

#debug ip dhcp-client