Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug interface < interface >

Use the debug interface command to activate debug messages associated with the specified interface.

Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this

command to disable the debug messages.

Syntax Description

< interface > Activates debug messages for the specified interface. Type debug interface ? for

a complete list of applicable interfaces.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug interface command activates debug messages to aid in the troubleshooting of physical

interfaces.

Usage Examples

The following example activates all possible debug messages associated with the Ethernet port:

>enable

#debug interface ethernet