Command Reference Guide

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

backup auto-backup

Use the backup auto-backup command to configure the PPP interface to automatically attempt a backup

upon failure. For more detailed information on PPP backup functionality, refer to the Functional Notes

and Technology Review sections of the command.

Syntax Description

No subcommands.

Default Values

By default, all backup endpoints will automatically attempt backup upon a failure.

Command Modes

(config-fr 1.16)# Virtual Frame Relay Sub-Interface Configuration Mode

(config-ppp 1)# PPP Interface Configuration Mode

Usage Examples

The following enables automatic backup on the endpoint:

(config)#interface ppp 1

(config-ppp 1)#backup auto-backup