Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 73
debug hdlc [errors | verbose]
Use the debug hdlc command to activate debug messages associated with the HDLC interface. Debug
messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to
disable the debug messages.
Syntax Description
errors Enables protocol error and statistic messages.
verbose Enables detailed debug messages.
Default Values
By default, all debug messages in the Secure Router OS are disabled.
Command Modes
# Enable Command Mode
Usage Examples
The following example activates detailed debug messages associated with the HDLC interface:
>enable
#debug hdlc verbose