Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug frame-relay multilink <interface>

Use the debug frame-relay multilink command to activate debug messages associated with Frame Relay

multilink operation. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the

no form of this command to disable the debug messages.

Syntax Description

<interface> Optional. Activates debug messages for the specified interface. Type debug

frame-relay multilink ? for a complete list of applicable interfaces.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Usage Examples

The following example activates debug messages associated with multilink operation for all Frame Relay

interfaces:

>enable

#debug frame-relay multilnk