Command Reference Guide

SROS Command Line Interface Reference Guide BGP Neighbor Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 712
advertisement-interval <seconds>
Use the advertisement-interval command to configure the Secure Router OS to specify how long the
BGP process waits before sending updates to the neighbor.
Syntax Description
<seconds> Specifies the advertisement interval in seconds. Range: 0 to 600.
Default Values
By default, the advertisement interval is 30 seconds for external neighbors and 5 seconds for internal
neighbors.
Command Modes
(config-bgp-neighbor)# BGP Neighbor Configuration Mode
Functional Notes
This command sets the minimum interval between sending updates to the specified neighbor.
Usage Examples
The following example configures the BGP process to wait at least 100 seconds before sending updates to
the neighbor:
(config-bgp-neighbor)#advertisement-interval 100