Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug frame-relay [events | llc2 | lmi]

Use the debug frame-relay command to activate debug messages associated with the Frame Relay

operation. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of

this command to disable the debug messages.

Syntax Description

events Activates debug messages for generic Frame Relay events (such as Frame Relay

interface state)

llc2 Activates debug messages for the logical link control layer

lmi Activates debug messages for the local management interface (such as DLCI

status signaling state, etc.)

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug frame-relay command activates debug messages to aid in the troubleshooting of Frame Relay

links.

Usage Examples

The following example activates all possible debug messages associated with Frame Relay operation:

>enable

#debug frame-relay events

#debug frame-relay llc2

#debug frame-relay lmi