Command Reference Guide

SROS Command Line Interface Reference Guide BGP Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 707
bgp log-neighbor-changes
Use the bgp log-neighbor-changes command to control the logging of neighbor state changes. Use the no
form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, neighbor changes are not logged.
Command Modes
(config-bgp)# BGP Configuration Mode
Functional Notes
This command controls logging of BGP neighbor state changes (up/down) and resets. This information is
useful for troubleshooting and determining network stability.
Usage Examples
The following example enables logging of BGP neighbor state changes:
(config-bgp)#bgp log-neighbor-changes