Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
61626364656667686970
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 70
debug firewall
Use the debug firewall command to activate debug messages associated with the Secure Router OS
firewall operation. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the Secure Router OS are disabled.
Command Modes
# Enable Command Mode
Functional Notes
The debug firewall command activates debug messages to provide real-time information about the
Secure Router OS stateful inspection firewall operation.
Usage Examples
The following example activates the debug messages for the Secure Router OS stateful inspection
firewall:
>enable
#debug firewall