Command Reference Guide

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 693
pvc <VPI/VCI>
Use the pvc command to select the ATM virtual link for this sub-interface. Use the no form of this
command to remove the link.
Syntax Description>
<VPI/VCI> Specifies the ATM network virtual path identifier (VPI) for this PVC and the ATM
network virtual path identifier (VPI) for this PVC. The VPI value is in the range of 0
to 255, and the VCI value is in the range of 32 to 65535.
Default Values
No default value is necessary for this command.
Command Modes
(config-atm 1.1)# ATM Sub-Interface Configuration Mode required
Usage Examples
The following example sets the VPI to 8 and the VCI to 35:
(config)#interface atm 1.1
(config-atm 1.1)#pvc 8/35