Command Reference Guide

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 691
oam-pvc managed <frequency>
Use the oam rety command to enable end-to-end F5 Operation, Administration, and Maintenance (OAM)
loopback cell generation and OAM management for an ATM interface. Use the no form of this command
to disable generation of OAM loopback cells.
Syntax Description>
<frequency> Time delay between transmitting OAM loopback cells. The range is from 0 to 600
seconds.
Default Values
By default, the frequency is 1 seconds.
Command Modes
(config-atm 1.1)# ATM Sub-Interface Configuration Mode required
Usage Examples
The following example enables OAM loopback cell generation with a frequency of 5 seconds:
(config)#interface atm 1.1
(config-atm 1.1)#oam-pvc manage 5