Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 69
debug dynamic-dns [verbose]
Use the debug dynamic-dns command to display debug messages associated with dynamic DNS. Debug
messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to
disable the debug messages.
Syntax Description
verbose Turns on verbose messaging.
Default Values
By default, all debug messages in the Secure Router OS are disabled.
Command Modes
# Enable Command Mode
Usage Examples
The following example activates dynamic DNS debug messages:
>enable
#debug dynamic-dns verbose