Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
671672673674675676677678679680
SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 674
ip dhcp [release | renew]
Use the ip dhcp command to release or renew the DHCP IP address. This command is only applicable
when using DHCP for IP address assignment.
Syntax Description
release Use this keyword to release DHCP IP address.
renew Use this keyword to renew DHCP IP address.
Default Values
No default values required for this command.
Command Modes
(config-interface)# Interface Configuration Mode
Usage Examples
The following example releases the IP DHCP address for the ATM sub-interface 1.1:
(config)#interface atm 1.1
(config-atm 1.1)#ip dhcp release