Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug backup

Use the debug backup command to activate debug messages associated with backup operation. Debug

messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to

disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug backup command activates debug messages to aid in the troubleshooting of backup links.

Usage Examples

The following example activates debug messages for backup operation:

>enable

#debug backup