Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 65
debug bridge
Use the debug bridge command to display messages associated with bridge events. Debug messages are
displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable debug
messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the Secure Router OS are disabled.
Command Modes
# Enable Command Mode
Usage Examples
The following example activates bridge debug messages:
#debug bridge