Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug atm packet [interface atm | vc] < ATM port | VPI/VCI> vcd <vcd

number>

Use the debug atm packet command to activate debug messages associated with packets on ATM ports

and virtual circuits. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the

no form of this command to disable the debug messages.

Variations of this command include the following:

debug atm packet .

debug atm packet [interface atm | vc] <port id>

debug atm packet interface atm <port id> vcd <port>

Syntax Description

interface atm Shows packets on a specific ATM port and on all virtual circuits.

vc Shows packets on a specific virtual circuit.

<ATM port> Specifies ATM port number.

<VPI/VCI> Specifies virtual path identifier and virtual channel identifier (VPI/VCI).

vcd Shows packets on specific virtual circuit descriptors (VCD).

<vcd number> Specifies a VCD port number.

Default Values

By default, all debug messages in the SROS are disabled.

Command Modes

# Enable Command Mode

Usage Examples

The following example activates debug ATM packet debug messages on ATM port 1:

>enable

#debug atm packet interface atm 1