Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
621622623624625626627628629630
SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 622
ip dhcp [release | renew]
Use the ip dhcp command to release or renew the DHCP IP address. This command is only applicable
when using DHCP for IP address assignment.
Syntax Description
release Use this keyword to release DHCP IP address.
renew Use this keyword to renew DHCP IP address.
Default Values
No default values required for this command.
Command Modes
(config-interface)# Interface Configuration Mode required (applies only to virtual interfaces)
Usage Examples
The following example releases the IP DHCP address for the virtual interface:
(config)#interface frame-relay 1.3
(config-fr 1.3)#ip dhcp release