Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 62
debug atm events
Use the debug atm events command to display events on all ATM ports and all virtual circuits. Debug
messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to
disable debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the Secure Router OS are disabled.
Command Modes
# Enable Command Mode
Usage Examples
The following example activates ATM event messages:
>enable
#debug atm events