Command Reference Guide

SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 604
backup auto-restore
Use the backup auto-restore command to configure the sub-interface to automatically discontinue backup
when all network conditions are operational. Use the no form of this command to disable the auto-restore
feature.
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically restore the primary connection when the failure
condition clears.
Command Modes
(config-fr 1.16)# Virtual Frame Relay Sub-Interface Configuration Mode required
Usage Examples
The following configures the Secure Router OS to automatically restore the primary connection when the
failure condition clears:
(config)#interface frame-relay 1.16
(config-fr 1.16)#backup auto-restore