Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug aaa

Use the debug aaa command to activate debug messages associated with authentication from the AAA

subsystem. Debug messages are displayed (real-time) on the terminal (or Telnet) screen. Use the no form

of this command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the SROS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug aaa events include connection notices, login attempts, and session tracking.

Usage Examples

The following is sample output for this command:

>enable

#debug aaa

AAA: New Session on portal 'TELNET 0 (172.22.12.60:4867)'.

AAA: No list mapped to 'TELNET 0'. Using 'default'.

AAA: Attempting authentication (username/password).

AAA: RADIUS authentication failed.

AAA: Authentication failed.

AAA: Closing Session on portal 'TELNET 0 (172.22.12.60:4867)'.