Command Reference Guide

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 580
frame-relay lmi-type <type>
Use the frame-relay lmi-type command to define the Frame Relay signaling (LMI) type. Use the no form
of the command to return to the default value.
Syntax Description
<type> Sets the signaling type for the endpoint
ansi Annex D signaling method
auto Automatically determine signaling type by messages received on the frame circuit
cisco Group of 4 signaling method
none Turns off signaling on the endpoint. This is used for backup connections.
q933a Annex A signaling method
Default Values
<type> ansi
Command Modes
(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required
Usage Examples
The following example sets the signaling method for the endpoint to cisco:
(config)#interface frame-relay 1
(config-fr 1)#frame-relay lmi-type cisco