Command Reference Guide

SROS Command Line Interface Reference Guide BRI Interface Configuration Command set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 561
bonding txinit-timer <seconds>
Use the bonding txinit-timer command to specify the value (in seconds) for the originating endpoint
negotiation timeout. Use the no form of this command to return to the default value.
Syntax Description
<seconds> Specifies the number of seconds the endpoint waits to detect the BONDING
negotiation frame pattern from the remote endpoint (when a call is connected)
before considering the BONDING negotiation a failure
Default Values
<seconds> 10 seconds
Command Modes
(config-bri 1/2)# BRI Interface Configuration Mode required
Functional Notes
Specifies the length of time the originating endpoint attempts to detect the BONDING negotiation pattern
from the answering endpoint before deciding the BONDING call has failed.
Usage Examples
The following example defines a txinit-timer value of 15 seconds:
(config)#interface bri 1/2
(config-bri 1/2)#bonding txinit-timer 15