Command Reference Guide

SROS Command Line Interface Reference Guide BRI Interface Configuration Command set

bonding txcid-timer <seconds>

Use the bonding txcid-timer command to specify the value (in seconds) for the bearer channel

(B-channel) negotiation timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds> Specifies the number of seconds the endpoint allots for negotiating data rates and

channel capacities before considering the BONDING negotiation a failure

Default Values

<seconds> 5 seconds

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Functional Notes

Specifies the length of time both endpoints attempt to negotiate an agreeable value for bearer channels

and channel capacities before deciding the BONDING call has failed.

Usage Examples

The following example defines a txcid-timer value of 8 seconds:

(config)#interface bri 1/2

(config-bri 1/2)#bonding txcid-timer 8