Command Reference Guide

SROS Command Line Interface Reference Guide Modem Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 555
modem countrycode <countryname>
Use the modem countrycode command to configure the modem to operate in a specified country.
Syntax Description
<countryname> Specifies the country where the modem will operate.
Default Values
By default, the modem countrycode is set to USA/CANADA.
Command Modes
(config-modem 1/2)# Modem Interface Configuration Mode
Usage Examples
The following example sets modem countrycode to Germany:
(config)#modem countrycode germany