Command Reference Guide

SROS Command Line Interface Reference Guide Modem Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 554
dialin
Use the dialin command to enable the modem for remote console dialin, disabling the use of the modem
for backup.
Syntax Description
No subcommands.
Default Values
By default, dialin is disabled.
Command Modes
(config-modem 1/2)# Modem Interface Configuration Mode
Usage Examples
The following example enables remote console dialin:
(config)#interface modem 1/2
(config-modem 1/2)#dialin