Command Reference Guide

SROS Command Line Interface Reference Guide E1 Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 544
ts16
Use the ts16 command to enable timeslot 16 multiframe to be checked on the receive signal. Use the no
form of this command to disable ts16.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Command Modes
(config-e1 1/1)# E1 or G.703 Interface Configuration Mode required.
(config-e1 1/2)#
Usage Examples
The following example enables timeslot 16 multi-framing:
(config)#interface e1 1/1
(config-e1 1/1)#ts16