Command Reference Guide

SROS Command Line Interface Reference Guide T1 Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 516
show test-pattern
Use the show test-pattern command to display results from test patterns inserted using the test-pattern
command (see test-pattern [ones | zeros | clear | insert | p215 | p220 | p511 | qrss] on page 519 for more
information).
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Command Modes
(config-t1 1/1)# T1 Interface Configuration Mode
Usage Examples
The following is sample output from this command:
(config-t1 1/1)#show test-pattern
Qrss Errored Seconds: 6