Command Reference Guide

SROS Command Line Interface Reference Guide T1 Interface Configuration Command Set

remote-alarm [rai]

The remote-alarm command enables transmission of a remote alarm. Use the no form of this command to

disable all transmitted alarms.

Syntax Description

rai Choose to send a remote alarm indication (RAI) in response to a loss of frame.

This also disables a received RAI from causing a change in interface operational

status.

Default Values

The default for this command is rai.

Command Modes

(config-t1 1/1)# T1 interface configuration mode.

Usage Examples

The following example enables transmission of RAI in response to a loss of frame:

(config-t1 1/1)#remote-alarm rai