Command Reference Guide

SROS Command Line Interface Reference Guide Serial Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 501
shutdown
Use the shutdown command to disable the serial interface. Use the no form of this command to activate
the serial interface.
Syntax Description
No subcommands.
Default Values
By default, the serial interface is shutdown.
Command Modes
(config-ser 1/1)# Serial Interface Configuration Mode
Functional Notes
While in shutdown, all data transmission ceases and all DTE leads become inactive.
Usage Examples
The following example disables the serial interface:
(config)#interface serial 1/1
(config-ser 1/1)#shutdown